Support Center

HOWTO: DEXGate Quick Start Guide

Last Updated: Aug 21, 2015 05:12PM CEST
In order to be able to follow this guide you'll need
  • DEXGate
  • Power supply
  • A computer
  • Ethernet network cable
  • Internet connection configuration

Setting up the network

There are three options to connect the DEXGate to the Internet:

  • Ethernet Cable
    1. Power the DEXGate up
    2. Connect a ethernet cable to the eth0 port of the DEXGate and to your local network
    3. Set up your computer to automatically get an IP from DHCP
    4. Connect an ethernet cable to your computer and the eth1 port of the DEXGate
    5. Use your internet browser to access http://172.16.0.1
    6. Enter the username and password (the defaults are admin/admin)
    7. Go to Wired Networks and choose the network configuration for your local network (contact your network administrator if you don't know how to do this)
  • Wireless
    1. Power the DEXGate up
    2. Set up your computer to automatically get an IP from DHCP
    3. Connect an ethernet cable to your computer and the eth1 port of the DEXGate
    4. Use your internet browser to access http://172.16.0.1
    5. Enter the username and password (the defaults are admin/admin)
    6. Go to Wireless Networks and choose the network configuration for your wireless network (contact your network administrator if you don't know how to do this)
  • 3G/GPRS
    1. Insert the SIM card (preferably without PIN) in the SIM holder in the center of the DEXGate board
    2. Power the DEXGate up
    3. Set up your computer to automatically get an IP from DHCP
    4. Connect an ethernet cable to your computer and the eth1 port of the DEXGate
    5. Use your internet browser to access http://172.16.0.1
    6. Enter the username and password (the defaults are admin/admin)
    7. Go to Mobile Connections and select the most suitable configuration for your SIM card

Connect to the server

  1. Go to "Settings"
  2. Go to Gateways and click under "Register new gateway"
  3. Select DEXGate and click on "Next"
  4. Add the corresponding MAC and click on "Save"

Connect and configure the meters

Connect the meters to the DEXGate. There's more information on this topic in:

Contact Us

  • Post a Public Question
  • Email Us
  • Tel : +34 931 810 195
    Hours: 9am - 6pm CEST, Mon to Fri
    support@dexmatech.com

    Check Public holidays here

                                         
    Support
soporte@dexmatech.com
http://assets2.desk.com/
false
dexma
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete