Support Center

HOWTO: Import Occupancy and Production Ratios

Last Updated: Sep 30, 2016 02:46PM CEST
In this article, is explained how to import historical Occupancy or Production data to DEXCell Energy Manager and use them as a ratio.

Import Occupancy and Production data

  1. Go to Settings > Gateways > click on "Register new gateway > and create a new virtual Gateway under your account. For more information, Here you will find how to create it. 
  2. Edit your new gateway > click on "Insert EXCEL" tab and then > "New data import". Here you can find the "template.xls" you will have to use to upload data to DEXCell Energy Manager. 
  1. Now it's time to fill the Excel file with the Occupancy or Production data. 
    • Device: here you will have to introduce the ID of your devices. In the case you have created a new gateway and you don't have any device yet, just introduce an identifier number such as 1 or 2. 
    • Parameter: as a parameter you have to indicate which type of data are you importing (occupancy or production) and the corresponding frequancy. Imagine you want to import monthly occupancy, so you have to introduce the number 12141 (4 as a monthly frequency and 1 as a discrete value). In the case you want to introduce the monthly production data, you have to write the number 13141 ((4 as a monthly frequency and 1 as a discrete value). For more information about parameter IDs, have a look on the following table
    • Date: Introduce the Date following the DD/MM/YYYY hh:mm:ss format
  2. Click on "Select File" and the import your data. Once the file is processed, it will appear the message that you have devices pending to accept. Accept them and assign to the corresponfing location. 

Define the Occupancy and Production Ratio

Once we have all the occupancy or production data, it's time to assign them as a Ratio or KPI in order to normalize our data. 
  1. Go to Settings > Locations > and edit the location you want to define the new ratio
  2. Click on Ratio tab. Here you can define the basic ratios (surface, daily average temperature, Degree days, occupancy, production, ...) or define new ratios
  3. Edit the Occupancy or Production ratio and select the device associated to this ratio
The ratios will appear as a button on all the analysis screens under the corresponding frequency:

Contact Us

  • Post a Public Question
  • Email Us
  • Tel : +34 931 810 195
    Hours: 9am - 6pm CEST, Mon to Fri

    Check Public holidays here

seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found