Support Center

Reports - Weekly Pro

Last Updated: Oct 14, 2013 01:30PM CEST

What is it for?

The weekly professional report has born as a tool to quickly check the performance of a facility, focusing on energy, cost and base load consumption. This report helps to identify the top-5 deviations above a 4-weeks baseline, monetizing them. 
Concerning the consumed base load, this report analyzes the evolution for last 4 weeks, and how much it cost each base load kW with the current energy prices.
   

Available configurations

  • Automations: Weekly
  • By locations
     

Requirements

  • Main device configured in location with data
  • Tariff assigned
   

Report explanation - Side A

  1. Report title. Report gets its title from the report configuration wizard. 
  2. Date range for the report. This report is only available in a weekly automation, so each Monday you will get the report. Below, it appears the report device name where data is acquired.
  3. Summary table for this week, compared with last week and 4 previous last week median.
  4. This chart shows the consumption by day of the week (Monday-Sunday), compared with the median of previous 4-weeks. Interesting to see if some remarkable differences appeared. 
  5. List of very important energy indicators for current week and last 4 weeks median. Energy managers must have a look at "base load %" and "Weekly Utilization Factor". First one relates how much power is used all the time, while the second one shows how many full utilization hours a week your facility uses.  
  6. This chart benchmarks 4 different energy curves: Current week, the 4 weeks median baseline, 4 weeks maximum demand and 4 weeks minimum demand. If your facility is performing well, it won't go above the 4 weeks maximum.
  7. Top 5 deviations above maximum demand curve. This table prints major 5 detected inefficiencies during the week above last 4 weeks maximum curve baseline. It gives information about the duration, wasted kWh and wasted money. 
  8. Top 5 deviations above median demand curve. This table prints major 5 detected inefficiencies during the week above last 4 weeks median curve baseline. It gives information about the duration, wasted kWh and wasted money.
  9. Summary cost wasted current week against last 4 weeks median baseline. It is a very important value to have a look all weeks.
 

Report explanation - Side B

  1. Report title. Report gets its title from the report configuration wizard. 
  2. Date range for the report. This report is only available in a weekly automation, so each Monday you will get the report. Below, it appears the report device name where data is acquired.
  3. This chart shows your current week consumption curve, in blue, with the average base load as a grey band. This is the volume of energy that your facility consumes every week by default, so it is a very sensible part of your total consumption and should be monitored closely.
  4. Summary figures according to base load, such as median base load, total base load energy consumed, base load weekly cost, and base load cost % above total weekly cost. These data indicate whether it is worthwhile to focus efforts on reducing consumption based or not.
  5. This chart shows the base load evolution for last 4 weeks. The dotted line indicates de % of base load above the total load, so the trend slope should be negative to get energy savings.
  6. Base load reduction/increase for current week versus 4 week previous median. 
  7. Summary table for last 4 weeks.
  8. Information message quantifying how much money costs each kW consuming during the whole year (8,760h).

Contact Us

  • Post a Public Question
  • Email Us
  • Tel : +34 931 810 195
    Hours: 9am - 6pm CEST, Mon to Fri
    support@dexmatech.com

    Check Public holidays here

    Support
support@dexma.com
http://assets2.desk.com/
false
dexma
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete